This is the Futaba 7C 2.4GHz Radio System with the R617FS FASST 7-Channel Receiver, and four S3004 Standard Ball Bearing Servos. This is the airplane version wh...More

This is the Futaba 7C 2.4GHz Radio System with the R617FS FASST 7-Channel Receiver, and four S3004 Standard Ball Bearing Servos. This is the airplane version which will default to airplane settings when powered up and has a ratcheted throttle stick. Modeler can change from the default mode (mode 2 in USA) by holding the Mode and End keys and then turning transmitter On to access the STK feature, changing mode and turning transmitter Off and then On again. It is recommended to send transmitter to the Futaba Service Center to change switch operation. R617FS FASST Receiver Size: 1.6 x 1.1 x .35 (40 x 27 x 9mm) Power Requirement: 4.8 - 6V Current Drain: 80mA (at no signal) Weight: 0.34oz (9.8g) with case, 0.25oz (7g) without case S3004 Standard Ball Bearing Servo Speed: 0.23 sec/60¦ @ 4.8V 0.19 sec/60¦ @ 6.0V .18 sec/60¦ @ 6V Torque: 44 oz-in (3.2 kg-cm) at 4.8V 57 oz-in (4.1 kg-cm) at 6.0VV Length: 1.6 (41mm) Width: 0.8 (20mm) Height: 1.4 (36mm) Weight: 1.3 ounce (37.2 grams) Connector: J type with approx. 5 (127mm) wire Model memories: 10 COMMENTS: The 7C 2.4GHz System is available in the following configurations; FUTK7000 Airplane Version w/4-S3152 Digital High-Torque Servos FUTK7001 Heli Version w/4-S3152 Digital High-Torque Servos FUTK7002 Airplane Version w/4-S3004 Standard Ball Bearing Servos FUTK7004 Airplane version with no servos FUTK7005 Heli version with no servos *All include R617FS Receiver jxs 6/15/07 ir/jxsLess