This is your no-solder LED lighting solution for RPM Light Canisters RPM Tail Lights!Use RCL106 to add 6 3mm white LED lights to RPM Roof Canisters with 4 ext...More

This is your no-solder LED lighting solution for RPM Light Canisters RPM Tail Lights!Use RCL106 to add 6 3mm white LED lights to RPM Roof Canisters with 4 extra constant LED channels for adding accessory lights (RPM Front Bumper Canisters, RPM Tail Light Canisters).Compatible with RPM Roof-Mounted Light Bar Set RPM80922, RPM80923 RPM80925 --Direct fit for Slash 4x4, Slash SC10.Power directly from the RX or optional battery source.To change LED sizes or colors use 5mm or 3mm LEDs.Everything needed for a complete installation is included with every lighting system!Includes:Instruction Set - (1) standard 10 LED controller RCL5051(1) RX plug RCL5073(6) 14" wire extensions RCL539014(6) 3mm white LEDs RCL5280W(6) 2P connector housings - (2) zip ties bases RCL5080Specs:SYSTEM CURRENT DRAW (@6V): 110mA(A standard servo draws approx. 350mA)LED ControllerINPUT VOLTAGE: 3.6-7.4V [6V Optimal]TYP OUTPUT CURRENT (per LED channel): 20-30mABlue, Green, White, White Strobe, Red Strobe LEDsFORWARD VOLTAGE: 3.2VMAX CURRENT: 30mAAmber, Red LEDsFORWARD VOLTAGE: 1.9VMAX CURRENT: 30mA*Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output. *DO NOT look directly into beam.Less