Navigation

  • * Team Associated 9040 RC10B4.1 Factory Team Worlds Car Kit

    By Associated Electronics |
    Product Number ASC9040
    $0.00

    y Please allow 5-7 days for free in store pick up or flat rate shipping.
    1/10 Desert Truck Rtr
    To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown USA locations within miles of
    qty $0.00

    This is the 1/10 scale electric powered, radio controlled, Associated RC10 B4.1 Factory Team Competition Worlds Buggy Kit. COMMENTS: The DuraTrax Element 3900kV...*More

    This is the 1/10 scale electric powered, radio controlled, Associated RC10 B4.1 Factory Team Competition Worlds Buggy Kit. COMMENTS: The DuraTrax Element 3900kV Brushless System (DTXC3122) is an ideal, affordable upgrade for this vehicle. For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 3/16x3/8 Transmission 1 DTXC1423 2 10x16mm Transmission 1 ASCC9832 2 3/16x3/8 Rear Hubs 1 DTXC1423 2 .187x0.50x.196 Rear Hubs 1 ASCC7935 4 3/16x3/8 Front Hubs 1 DTXC1423 jxs 01/10/12 ir/jxs*Less

    Rating:
    Print This Page
    Key FeaturesFull SpecsNeeded to Complete Comments/Reviews
    • Ball Bearings: Full set, 14 rubber sealed
    • Body: Pro-Line Bulldog +8mm
    • Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
    • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
    • Chassis: Molded composite bathtub style, +8 B4.1 chassis conversion kit
    • Differentials: Ball type with lightweight outdrives
    • Dog Bones: MIP CVDs
    • Drive: Two wheel with CVA drive shafts with pin retainer clips with steel center-drilled front axles
    • Forward-swept front end design provides maximum front end ground clearance
    • Front axles: Steel center drilled
    • Front Tires: Pro-Line M3 4 rib inner diameter: 2.2 (55.88mm), 1 (26mm) wide with foam inserts
    • Rear Hubs: Factory Team 0¦
    • Rear Tires: Pro-line M3 Holeshot high traction, outer diameter 3.15 (80mm), inner diameter 2.2 (55.88mm) with foam inserts
    • Servo saver: Built-in with aluminum servo saver bolt and heavy duty spring
    • Shocks: Factory Team V-2 oil-filled hard anodized threaded with bleed screw caps, 30 weight silicone shock oil, Factory Team blue aluminum shock bushings and pivot balls
    • Spur Gear: Plastic, 81 tooth, 48 pitch
    • Steering: Angled-bellcrank design to minimize bump steer and maintain constant steering angles throughout the range of suspension travel
    • Suspension: Optimized for use with LiPo batteries, mounts for 4¦, 3.5¦, 3¦, and 2.5¦ rear toe
    • Toe-In: Fully adjustable, with titanium turnbuckles, toe-in describes the angle of the front tires as viewed from the top
    • Transmission: 2.6:1 laydown type, high-torque capacity, V2 slipper assembly with high rate spring for more consistent slipper clutch adjustments
    • Turnbuckles: Factory Team blue anodized titanium turnbuckles
    • Wheels: Yellow dish front; diameter 2.2 (55.88mm), width 0.87 (22.31mm), rear; diameter 2.2 (55.88mm), width 1.42 (36.08mm)
    • Height:2.4 (62mm)
    • Internal Gear Ratio:
    • Length:10.9 (276mm)
    • Length:15.16 (385mm)
    • Weight:3.38lbs (1535g) running weight will vary depending on parts
    • Wheelbase:11.06 (281mm)
    • Width:5.6 (143mm)
    • Width:9.84 (250mm)
    • ~LiPo Battery Bag
  • To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown USA locations within miles of