Navigation

  • * Reactor Bipe .61 GP/EP Sport/3D ARF

    Product Number GPMA1023
    $0.00

    y Please allow 5-7 days for free in store pick up or flat rate shipping.
    1/10 Desert Truck Rtr
    To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    HobbyTown USA locations within miles of
    qty $0.00

    This is the radio controlled, electric or glow powered, almost ready to fly Great Planes Reactor Bipe Sport 3D Airplane. For Intermediate to Advanced Modeler/Fl...*More

    This is the radio controlled, electric or glow powered, almost ready to fly Great Planes Reactor Bipe Sport 3D Airplane. For Intermediate to Advanced Modeler/Fliers 14 Years of Age and Older. COMMENTS: Following are the Top Flite MonoKote colors used to cover this model and order numbers for six foot rolls; White: TOPQ0204 Metallic Blue: TOPQ0402 Orange: TOPQ0202 Aluminum: TOPQ0205 If a replacement fuel tank is needed, order the Sullivan 10oz Flextank (SULQ1728), or the DuBro 10oz tank (DUBQ0210). Some minor trimming and modifications may be required. jxs 6/04/09 ir/jxs*Less

    Rating:
    Print This Page
    • Aileron Control: Dual servo per wing (four total)
    • Building Time: Ready to fly in several hours
    • Canopy: Single, clear plastic (pilot figure shown in photos not included)
    • Construction: Balsa and ply
    • Covering: Top Flite MonoKote
    • Cowl: Painted fiberglass
    • Engine Mount: Two-piece composite
    • Fuel Tank: Approximately 10oz (300cc)
    • Landing Gear: Painted fiberglass
    • Radio Compartment: Plywood reinforced, accessible under canopy
    • Spinner: White plastic 2.25 (58mm) diameter
    • Wheel Pants: Painted fiberglass
    • Wheels: Foam, main 2.75 (70mm) diameter, 1 (25.4mm) diameter tailwheel
    • Wings: One-piece, secures to fuselage with plywood wing bolt plate
    • Ailerons:3/8 (9.5mm) 6¦ 7/8 (22.2mm) 13¦ 1-1/2 (38mm) 24¦
    • Airfoil:Semi symmetrical
    • Center of Gravity:5.25 (133mm) from the leading edge of the middle
    • Control Throws:Low Rate High Rate 3D
    • Elevator:7/8 (22.2mm) 13¦ 1-3/8 (35mm) 20¦ 2-3/4 (70mm) 43¦
    • Length:58.5 (1485 mm)
    • Rudder:2-1/4 (57mm) 18¦ 3-1/2 (89mm) 29¦ 5 (127mm) 44¦
    • Top and Bottom Wingspan:48 (1220mm)
    • Weight:7-7.5 lb (3170-3400 g)
    • Wing Area:1145 in¦ (73.9dm¦)
    • Wing Loading:14-15 oz/ft¦ (43-46 g/dm¦)
    • ~LiPo Battery Bag
    • ~3 QTY - 16 inch servo extension
    • ~3 QTY - 24 inch servo extension
    • ~Building and Field equipment
    • ~Propeller that is compatible with selected engine
    • ~2 - 11.1V 3200MAH 3S Lipo Batteries OR 1 - 22.1V 3200MAH 6S Lipo Battery
    • ~Battery charger that is compatible with selected battery
    • ~FOR BOTH GAS AND ELECTRIC POWER YOU WILL NEED THE FOLLOWING:
    • ~7-8 mini Servos, 1 standard servo for throttle if using glow power
    • ~4 QTY 6 inch servo extensions
    • ~.61 cu in (10cc) 2-stroke engine OR .70 - .91 cu in (11.5 - 15cc) 4-stroke engine
    • ~Propeller that is compatible with selected engine
    • ~FOR ELECTRIC OPERATION -
    • ~Rimfire .80 (50-55-500KV) brushless motor
    • ~Silver Series 60A ESC
    • ~12 inch three dual servo connectors
    • ~FOR GLOW OPERATION YOU WILL NEED:
  • To browse selection and pricing, enter your Zip Code below then click SHOP THIS HOBBYTOWN.
    X
    HobbyTown USA locations within miles of